Working Principle Of Check Valves

Oct 12, 2026

Leave a message

Check valves are also used in pipelines that supply auxiliary systems where the pressure may rise above the system's operating pressure. Check valves are primarily categorized into swing-type check valves (which rotate about a center of gravity) and lift-type check valves (which move along an axis).
The function of a check valve is to allow fluid to flow in only one direction while preventing flow in the opposite direction. These valves typically operate automatically: the pressure of the fluid flowing in the intended direction forces the valve disc open, whereas if the fluid attempts to flow in the reverse direction, the fluid pressure-combined with the weight of the disc itself-presses the disc against the valve seat, thereby shutting off the flow.


Check valves fall into this category and include both swing-type and lift-type designs. A swing-type check valve features a hinge mechanism and a door-like disc that rests against an inclined valve seat. The disc is designed with a hinge mechanism that provides sufficient room for it to swing, ensuring that it consistently seats correctly and makes full, proper contact with the valve seat surface. Depending on specific performance requirements, the disc may be made entirely of metal, or it may incorporate inserts such as leather, rubber, or a synthetic covering. When a swing-type check valve is fully open, the fluid encounters minimal resistance, resulting in a relatively low pressure drop across the valve. In a lift-type check valve, the disc rests on a sealing surface within the valve body. Apart from the fact that the disc is free to lift and lower, the construction of this valve is similar to that of a globe valve; fluid pressure lifts the disc off the seat, while any backflow causes the disc to drop back onto the seat, cutting off the flow. Depending on the operating conditions, the disc may be of an all-metal design, or it may feature a rubber pad or ring mounted on a disc holder. Similar to globe valves, the flow passage through a lift-type check valve is narrow; consequently, the pressure drop across a lift-type check valve is greater than that of a swing-type check valve, with the latter offering minimal restriction to flow.

Send Inquiry