Key Considerations For Selecting Threaded Check Valves

Oct 15, 2026

Leave a message

‌Nominal Pressure‌: Common ratings include PN10, PN16, and PN25; must be matched to the piping system.


‌Nominal Diameter‌: Ranges from DN15 to DN200; select based on flow rate requirements.


‌Sealing Material‌: Rubber (NBR, EPDM) is suitable for media at ambient temperatures, while PTFE is used for high-temperature applications.


‌Opening Pressure‌: Typically 0.01–0.05 MPa; designs may require optimization for low-flow-rate scenarios.

Send Inquiry