Working Principle Of Globe Valves

Oct 16, 2026

Leave a message

The globe valve-also known as a stop valve-is one of the most widely used types of valves. Its popularity stems from several advantages: minimal friction between sealing surfaces during opening and closing, high durability, a short opening stroke, ease of manufacturing and maintenance, and suitability for a wide range of pressures, from low and medium to high. The closing mechanism relies on pressure applied via the valve stem, which forces the sealing surface of the valve disc against the sealing surface of the valve seat, thereby blocking the flow of the medium. In my country, industry standards for valve standardization, serialization, and generalization (the "three-standardization" policy) mandate that the flow direction for globe valves must be from top to bottom; consequently, they are directional and must be installed accordingly. Compared to gate valves, globe valves have a greater structural length and higher fluid resistance, and their sealing reliability may diminish over long-term operation.

As one of the most critical types of shut-off valves, the globe valve plays a vital role in the aerospace sector. Serving as a key component in aerospace equipment, it facilitates the transport, shut-off, and regulation of media. Its sealing performance directly impacts the safe and reliable operation of such equipment. Researching the factors that influence the sealing characteristics of typical globe valves-and the nature of these influences-provides essential guidance for the structural design of valve sealing pairs, ultimately enhancing both sealing performance and reliability.


Working Principle and Characteristics of Globe Valves
Valves serve the essential functions of shutting off or throttling the flow of media within a pipeline. As a crucial shut-off valve, the globe valve achieves its seal by applying torque to the valve stem. This torque generates axial pressure on the valve disc, pressing its sealing surface firmly against that of the valve seat and preventing the medium from leaking through the gap between the two surfaces.
The sealing pair of a globe valve consists of the sealing surfaces of the valve disc and the valve seat. The valve stem drives the disc to move vertically along the centerline of the valve seat. During operation, the globe valve requires only a small opening stroke, which facilitates flow regulation; furthermore, it is easy to manufacture and maintain, and it is compatible with a broad range of pressures.
Compared to the gate valve-another common type of shut-off valve used in industrial production-the globe valve features a simpler structure, making it easier to manufacture and maintain. In terms of service life, the sealing surfaces of a globe valve are resistant to wear and scuffing. Since there is no relative sliding between the valve disc and the seat sealing surface during the opening and closing process, wear and scuffing are minimized, thereby extending the service life of the sealing pair. Furthermore, the disc travel of a globe valve during the full opening or closing process is short, resulting in a more compact overall height compared to a gate valve. The drawbacks of a globe valve include a relatively high operating torque-making rapid opening and closing difficult-and a complex, tortuous flow path within the valve body, which creates significant flow resistance and leads to substantial hydrodynamic pressure loss in the pipeline.

Send Inquiry