Classification of Flanged Ball Valves

Sep 10, 2026

Leave a message

Classification by Structure
1. Floating Ball Valve
In this type, the ball is "floating." Under the pressure of the medium, the ball shifts slightly and presses firmly against the sealing surface at the outlet end, ensuring a tight seal. While floating ball valves feature a simple design and good sealing performance, the entire load exerted by the medium on the ball is transferred to the outlet-side sealing ring. Therefore, it is essential to ensure that the material of the sealing ring can withstand the operational load transmitted from the ball. This design is widely used for low- to medium-pressure ball valves.
2. Trunnion-Mounted (Fixed) Ball Valve
In this type, the ball is fixed in position and does not shift under pressure. Trunnion-mounted ball valves are equipped with floating seats; under the pressure of the medium, the seat shifts to press the sealing ring firmly against the ball, ensuring a seal. These valves typically incorporate bearings on the upper and lower stems (trunnions), which results in lower operating torque, making them suitable for high-pressure and large-diameter applications. To further reduce operating torque and enhance sealing reliability, "oil-sealed" ball valves have been developed. In these, a specialized lubricant is injected between the sealing surfaces to form an oil film, which improves sealing performance while simultaneously reducing operating torque-an ideal solution for high-pressure, large-diameter valves.
3. Resilient (Elastic) Ball Valve
In this type, the ball itself is designed to be resilient. Both the ball and the seat sealing rings are constructed from metal. Because the required sealing contact pressure is extremely high-exceeding what can be achieved by the pressure of the medium alone-an external force must be applied. Such valves are designed for high-temperature and high-pressure media. The ball achieves its resilience through a slot cut into the lower inner wall. When the valve is closed, a wedge-shaped head on the stem expands the ball, forcing it against the seat to create a seal. Before the ball is rotated, the wedge-shaped head is retracted, allowing the ball to return to its original shape. This creates a small gap between the ball and the seat, which reduces friction on the sealing surfaces and lowers the operating torque. Classification by Port Configuration
Based on their port configuration, ball valves can be classified as straight-through, three-way, or right-angle types. The latter two types are used for distributing the medium or altering the direction of its flow.

Send Inquiry