Opening Process
1. In the closed position, the ball is pressed firmly against the valve seat by the mechanical force exerted by the valve stem.
2. As the handwheel is turned counter-clockwise, the valve stem moves in the opposite direction; the angled surface at the bottom of the stem causes the ball to disengage from the valve seat.
3. As the valve stem continues to rise, it interacts with a guide pin positioned within its helical groove, causing the ball to begin rotating without friction.
4. Upon reaching the fully open position, the valve stem has risen to its limit, and the ball has rotated to the fully open position.
Closing Process
1. To close the valve, the handwheel is turned clockwise; the valve stem begins to descend, causing the ball to move away from the valve seat and start rotating.
2. As the handwheel continues to turn, the guide pin-engaged within the helical groove of the valve stem-forces both the stem and the ball to rotate 90°.
3. Nearing the point of closure, the ball has completed a 90° rotation without making contact with the valve seat.
4. During the final turns of the handwheel, the angled surface at the bottom of the valve stem mechanically wedges against the ball, pressing it firmly into the valve seat to achieve a complete seal.