-
Cast Steel Pipeline Flame ArresterGZW-1 cast steel pipe flame arrestor is a deflagration-proof safety device with WCB cast steel housing and stainless steel corrugated flame arrester core.
-
Cast Steel 2‑way Plug ValveThe cast steel threaded two-way plug valve is a quarter-turn manual isolation valve with internal threaded ends. Its closing member is a cylindrical or tapered plug with a straight flow bore.
-
304 Pipeline Flame ArresterGZW-1 stainless steel pipe flame arrestor is a deflagration-proof safety device. Housing is cast from SS304/SS316L stainless steel with built-in stainless steel corrugated flame arrester core.
-
Manual Control ValveT40H manual regulating valve is a flanged manual flow control valve combining shut-off, throttling and flow regulation. Rotate handwheel to move disc up and down to change flow area and adjust...
-
Flanged Foot ValveFlanged foot valve is a type of check valve installed at the end of suction pipeline and submerged under liquid level. The disc opens under forward medium flow.
-
Manual Sludge Discharge ValveSD44X Manual Quick Sludge Drain Valve is an angle-type flanged quick-opening valve with lever rack & pinion drive, requiring no external power or air supply.
-
Electric Sludge ValveH742X Electric Sludge Drain Valve consists of electric actuator and angle-type valve body. It is an automatic valve specially designed for tank bottom sludge discharge in water treatment.
-
Normally‑closed Brass Threaded Solenoid Valve for WaterNormally Closed Brass Threaded Solenoid Valve for Water is 2/2 way solenoid valve with brass body and internal thread. It opens when energized and automatically closes upon power cut-off.
-
Cast Steel Flanged Solenoid Valve for SteamCast Steel Flanged Solenoid Valve for Steam, Model ZBSF, is 2/2-way pilot piston type with WCB cast steel body and flanged connection. Normally closed as standard, normally open type available on...
A flame arrestor, also called a flame trap, is a device that stops fluid combustion by extinguishing the flame. From: A Practical Guide to Piping and Valves for the Oil and Gas Industry, 2021...
Dec 22, 2020 · A flame arrester, the use of which in an open vent line or on the inlet to the Pressure/Vacuum Valve is an effective method to reduce the risk of flame transmission. The user is...
Aug 18, 2022 · Flame arrestment is achieved by a permeable barrier, usually a metallic matrix containing narrow channels, which removes heat and free radicals from the flame fast enough to both...
A flame arrester (or Arrestor) is a safety device fitted on the opening of an enclosure or to the connecting pipe work in a system of enclosure and which allow only gases and liquid etc. to...
Protect personnel and assets from vapor ignition. Protection from flames is of critical importance in systems that collect vapors, such as flare stacks, thermal oxidizers, and vapor recovery units....
The flame arrester's carefully constructed matrix of uniform openings quenches the flame by absorbing the flame's heat. This process provides an extinguishing barrier to the ignited vapor mixture. It...