Manual Sludge Discharge Valve

Send Inquiry
Manual Sludge Discharge Valve
Details
SD44X Manual Quick Sludge Drain Valve is an angle-type flanged quick-opening valve with lever rack & pinion drive, requiring no external power or air supply.
Category
Sludge Discharge Valve
Share to
Description

Shijiazhuang Hanqian Technology Co., Ltd. is one of the leading manufacturers and suppliers of manual sludge discharge valve in China. With abundant experience, we are committed to providing high quality customized valves with competitive price. If you're going to wholesale durable manual sludge discharge valve made in China, welcome to get quotation from our factory.

 

SD44X Manual Quick Sludge Drain Valve is an angle-type flanged quick-opening valve with lever rack & pinion drive, requiring no external power or air supply. It is mounted externally at the bottom wall of sedimentation tanks, clear water tanks and grit chambers, to periodically discharge sediment, sludge and grit accumulated at tank bottom. Widely adopted in waterworks, sewage treatment plants and circulating water tanks. Large straight flow passage prevents sludge clogging, simple operation for intermittent sludge discharge.

 

Working Principle

 

The valve remains closed under normal condition. For sludge draining, push down the handle; rack-pinion assembly lifts valve disc and opens valve rapidly. Sludge, sand and sediment are discharged fast by water pressure and gravity. After draining, lift the handle upward; valve disc falls back and presses tightly against seat. Medium pressure helps achieve tight sealing and stop drainage. Built-in locking mechanism can hold valve open after actuation.

 

Features

 

1. Manual lever quick-open design, fast opening/closing, low operation force, work without electricity or compressed air.

2. Large straight flow path, smooth passage, resistant to sand jamming and clogging.

3. Conical disc with rubber soft seal, reliable sealing, wear-resistant against sediment erosion.

4. Flanged connection for easy installation and maintenance.

5. Epoxy coated valve body for anti-corrosion, suitable for clean water and sewage.

6. Simple construction, low failure rate and low maintenance cost.

 

Specification

 

Model SD44X-10, SD44X-16
Nominal Diameter DN50~DN400
Nominal Pressure PN10 (1.0MPa), PN16 (1.6MPa)
Shell Test Pressure 1.5MPa / 2.4MPa
Seal Test Pressure 1.1MPa /1.76MPa
Medium Clean water, sewage, sediment-laden wastewater
Medium Temperature ≤80℃
Body Material Ductile Iron QT450/GGG50, Grey Cast Iron HT200
Disc Lining NBR / EPDM
Drive Parts Carbon Steel / Stainless Steel Rack & Pinion
Flange Standard GB/T9113, optional EN1092, ASME B16.5

 

Applications

 

Sedimentation tanks and clear water tanks in water treatment plants, grit chambers of sewage plants, circulating water tanks, bottom sludge discharge of water treatment structures.

 

Installation Reminder

 

Install at the lowest point of tank. An isolating gate valve is recommended upstream for maintenance isolation.

 

Hot Tags: manual sludge discharge valve, China manual sludge discharge valve manufacturers, suppliers, factory

Send Inquiry