Electric Sludge Valve

Send Inquiry
Electric Sludge Valve
Details
H742X Electric Sludge Drain Valve consists of electric actuator and angle-type valve body. It is an automatic valve specially designed for tank bottom sludge discharge in water treatment.
Category
Sludge Discharge Valve
Share to
Description

Shijiazhuang Hanqian Technology Co., Ltd. is one of the leading manufacturers and suppliers of electric sludge valve in China. With abundant experience, we are committed to providing high quality customized valves with competitive price. If you're going to wholesale durable electric sludge valve made in China, welcome to get quotation from our factory.

 

H742X Electric Sludge Drain Valve consists of electric actuator and angle-type valve body. It is an automatic valve specially designed for tank bottom sludge discharge in water treatment. The valve disc is driven by electric actuator, no manual operation on site required. It is installed at the bottom of sedimentation tanks and clear water tanks to discharge sediment and sludge automatically by timing or remote control. It can connect with PLC automatic control system for unattended operation, ideal for automatic sludge discharge in waterworks and sewage plants.

 

Working Principle

 

The valve disc presses tightly on valve seat and keeps closed under normal condition. After receiving electric control signal, the electric actuator drives transmission assembly to lift valve disc and open valve. Sludge and sand at tank bottom are discharged rapidly under water pressure and gravity. When sludge draining finishes and close signal comes, actuator lowers valve disc back to seal face and cut off medium. The actuator is equipped with limit protection and automatically cuts off power once in place to avoid overload damage.

 

Features

 

1. Electric actuation, local manual override + remote electric control, support automatic timed draining via control system.

2. Angle-type large straight flow passage, smooth flow path, anti-clogging against sludge and sand.

3. Rubber lined disc with soft seal, reliable sealing and wear resistance under sediment erosion.

4. Internal & external epoxy coating on valve body for superior anti-corrosion performance.

5. Electric actuator built-in stroke limit and overload protection for safe and stable operation.

6. Flanged connection for convenient installation and maintenance.

 

Specification

 

Model H742X-10, H742X-16
Nominal Diameter DN80~DN400
Nominal Pressure PN10 (1.0MPa), PN16 (1.6MPa)
Shell Test Pressure 1.5MPa / 2.4MPa
Seal Test Pressure 1.1MPa /1.76MPa
Medium Sewage, sludge water, clean water, sediment-laden wastewater
Medium Temperature ≤80℃
Body Material Ductile Iron QT450/GGG50, Grey Cast Iron HT200
Seal Material NBR / EPDM
Actuator Power Supply AC220V / AC380V (optional)
Control Signal On-off signal (4-20mA modulating type optional)
Flange Standard GB/T9113, optional EN1092, ASME B16.5

 

Applications

 

Sedimentation tanks and clear water tanks in waterworks, grit chambers and sludge thickening tanks in sewage treatment plants, sludge discharge at bottom of circulating water tanks.

 

Installation Reminder

 

Install at the lowest point of tank. An isolating gate valve is recommended upstream for maintenance isolation. Waterproof protection shall be done for electric actuator.

 

Hot Tags: electric sludge valve, China electric sludge valve manufacturers, suppliers, factory

Send Inquiry