Shijiazhuang Hanqian Technology Co., Ltd. is one of the leading manufacturers and suppliers of rubber‑flap flanged check valve in China. With abundant experience, we are committed to providing high quality customized valves with competitive price. If you're going to wholesale durable rubber‑flap flanged check valve made in China, welcome to get quotation from our factory.
Flange Rubber Flap Check Valve (Model HC44X / SFCV) is an automatic non-return valve. It opens and closes automatically by medium pressure to prevent fluid backflow in pipelines. The valve mainly consists of three components: valve body, bonnet and rubber flap. The rubber flap uses steel plate and reinforced nylon fabric as substrate, fully vulcanized with EPDM or NBR rubber on the surface, which is the only moving part. With flange connection at both ends, it is normally installed horizontally in water supply & drainage pipelines, commonly fitted at pump outlets to protect pumps from backflow damage and reduce water hammer impact.
Working Principle
When fluid flows forward, the medium pressure pushes the rubber flap open for smooth passage. Once flow stops or reverses, backpressure plus self-weight of the flap forces it to quickly seal against the valve seat to block reverse flow. The flap only needs 35° stroke for full opening. It closes rapidly with low slamming noise and mitigates water hammer better than conventional swing check valves.
Features
- Full bore streamlined passage, low head loss, energy-saving, less debris accumulation.
- Resilient rubber seat for bubble-tight zero leakage; good performance under low differential pressure.
- Short closing stroke, low impact noise, excellent water hammer suppression.
- Only one moving component, reliable operation and easy maintenance.
- Ductile iron body with fusion bonded epoxy coating for corrosion resistance; rubber flap replaceable separately.
- Large size can be equipped with hydraulic buffer cylinder for two-stage fast & slow closing to further reduce water hammer.
Specification
| Size Range | DN50 ~ DN600 |
| Pressure Rating | PN10 / PN16 / PN25 |
| Shell Test Pressure | 1.5PN; Seat Test Pressure |
| Working Temperature | 0~80℃ (EPDM up to 120℃) |
| Suitable Media | Clean water, sewage, neutral oil and non-corrosive liquid |
| Material | Body |
| End Connection | Flange, GB/T9113; Test Standard |
Applications
Municipal water supply & drainage, waterworks, wastewater treatment, building water system, fire protection pipeline, reservoir bypass, pump station outlet, petrochemical pipeline for neutral fluid.
Installation
Installation note: Horizontal installation is preferred; vertical installation is acceptable with upward flow direction.
Hot Tags: rubber‑flap flanged check valve, China rubber‑flap flanged check valve manufacturers, suppliers, factory