Cast Iron Non-Rising Stem Flanged Gate Valve

Send Inquiry
Cast Iron Non-Rising Stem Flanged Gate Valve
Details
Ductile iron non-rising stem flanged gate valve, model Z45X. Body and bonnet are cast from QT450-10 ductile iron with flanged connection. It adopts NRS (Non-Rising Stem) construction.
Category
Flanged Gate Valve
Share to
Description

Shijiazhuang Hanqian Technology Co., Ltd. is one of the leading manufacturers and suppliers of cast iron non-rising stem flanged gate valve in China. With abundant experience, we are committed to providing high quality customized valves with competitive price. If you're going to wholesale durable cast iron non-rising stem flanged gate valve made in China, welcome to get quotation from our factory.

 

Ductile iron non-rising stem flanged gate valve, model Z45X. Body and bonnet are cast from QT450-10 ductile iron with flanged connection. It adopts NRS (Non-Rising Stem) construction. The stem rotates without vertical movement. The fully rubber coated resilient wedge moves up and down to open/close fluid by turning handwheel. The overall stem height stays unchanged after installation, saving overhead space. Full bore passage brings low flow resistance with bi-directional tight shut-off. Suitable for buried pipelines and valve chambers with limited top clearance. Internal and external epoxy coating for anti-corrosion. Widely applied in municipal water supply, fire protection, sewage and HVAC water pipelines for isolation only, not recommended for throttling service.

 

Structural Features

 

  • NRS Non-Rising Stem: Stem rotates without lifting. Fixed overall height, ideal for buried installation and valve chambers.
  • Flanged Connection: Bolted flange joint, easy disassembly and maintenance, stable pressure bearing.
  • Resilient Rubber Coated Wedge: Ductile iron core fully vulcanized with EPDM or NBR rubber, bi-directional bubble tight shut-off, good resistance to sediment.
  • Full Bore Design: Bore size matches pipe inner diameter for smooth fluid flow and low pressure drop.
  • QT450 Ductile Iron Body: High strength and toughness, better impact resistance than grey cast iron. Internal & external epoxy powder coating against rust and corrosion.
  • Stainless Steel Stem: Wear and corrosion resistant; packing gland prevents medium leakage.

 

Item Specification

 

Nominal Size DN50~DN600
Nominal Pressure PN10, PN16, PN25 / Class150
Working Temp 0~80℃(EPDM);0~60℃(NBR)
Applicable Media water,air
Body QT450-10 Ductile Iron QT450-10
Wedge Ductile iron with full rubber coating
Stem 2Cr13 / 410 Stainless Steel
Rubber EPDM / NBR
Flange Standard GB/T9113, EN1092-2, ASME B16.5
Design & Test GB/T12232, GB/T13927, BS5163, EN12266
Operation Handwheel Manual

Hot Tags: cast iron non-rising stem flanged gate valve, China cast iron non-rising stem flanged gate valve manufacturers, suppliers, factory

Send Inquiry