What Is Valve Packing in a Gate Valve?

Sep 05, 2026

Leave a message

Core Function and Common Types of Gate Valve Packing
The primary function of gate valve packing is to seal the dynamic gap between the valve stem and the bonnet, preventing fluid (liquid or gas) from leaking along the stem. Depending on the characteristics of the medium, as well as temperature and pressure conditions, packing is generally categorized as follows:

Graphite Packing: Resistant to high temperatures (up to 600°C); suitable for applications involving steam or high-temperature oil, though it has relatively low flexibility.

PTFE (Polytetrafluoroethylene) Packing: Highly resistant to chemical corrosion (acids and alkalis) and effective across a temperature range of -200°C to 260°C; however, it is prone to "cold flow" (deformation under pressure) at high pressures.

Aramid Fiber Packing: Offers high strength and wear resistance; commonly used in high-pressure valves (such as those in oil pipelines), though it comes at a higher cost.

Spiral-Wound (Metal-Wound) Packing: Composed of metal strips combined with graphite or PTFE; provides both elasticity and pressure resistance (suitable for pressures up to 25 MPa).

Professional Reference: According to the ASME B16.34 standard, the selection of valve packing must align with the pressure rating of the medium-for instance, packing for a PN40-rated valve must be capable of withstanding a pressure of 4 MPa.

 

Selection and Maintenance of Valve Packing
Selection Criteria:
Medium Compatibility: PTFE is preferred for acidic media, while graphite is suitable for alkaline media.

Temperature and Pressure: High-temperature and high-pressure environments (such as those found in power plant boilers) require the use of graphite or spiral-wound packing.

Dynamic Sealing Requirements: For valves that are opened and closed frequently (such as control valves in chemical processing), aramid fiber packing is recommended to minimize wear.

Replacement Cycle:
The service life of packing is significantly influenced by operating conditions. For example:

Standard Water Valves (ambient temperature and pressure): Replace every 3–5 years.

High-Temperature Steam Valves (above 300°C): Inspect annually and replace every 2–3 years (referencing the API 600 standard).

Installation Notes:
The compression of the packing should be controlled within the 20%–30% range; excessive compression can cause the valve stem to seize or stick. When installing multi-layer packing, the layers must be stacked in a staggered (crisscross) pattern to prevent the joints from aligning and creating leakage paths.

Send Inquiry