Cast Iron Ball‑type Flanged Check Valve

Send Inquiry
Cast Iron Ball‑type Flanged Check Valve
Details
Cast Iron Flanged Ball Check Valve (Model HQ41X). Grey cast iron or ductile iron body with flanged ends, automatic ball type non-return valve. The valve core is rubber coated ball. Forward fluid pressure pushes the rubber ball along the guide rail inside valve cavity to open the passage.
Category
Flanged Check Valve
Share to
Description

Shijiazhuang Hanqian Technology Co., Ltd. is one of the leading manufacturers and suppliers of cast iron ball‑type flanged check valve in China. With abundant experience, we are committed to providing high quality customized valves with competitive price. If you're going to wholesale durable cast iron ball‑type flanged check valve made in China, welcome to get quotation from our factory.

 

Cast Iron Flanged Ball Check Valve (Model HQ41X). Grey cast iron or ductile iron body with flanged ends, automatic ball type non-return valve. The valve core is rubber coated ball. Forward fluid pressure pushes the rubber ball along the guide rail inside valve cavity to open the passage. When backflow occurs, the ball falls back onto seat by fluid pressure and self-weight to shut off reverse flow. Straight flow path with low pressure loss. It can be installed horizontally or vertically upward, widely used in water supply, sewage and municipal pipelines.

 

Construction

 

Cast iron body, bonnet, rubber wrapped ball, seat, ball guide rail, flange bolts.

Operation: Fully automatic, actuated by fluid pressure difference, no actuator required.

 

Features

 

  • Flanged ends for easy disassembly and maintenance. Cast iron body with epoxy coating for anti-rust, cost-effective.
  • Rubber coated ball core, soft tight shut-off and low noise during opening & closing.
  • Y-shaped valve cavity, low flow resistance, high flow capacity.
  • Suitable for horizontal or vertical upward installation, flexible pipeline layout.
  • Better tolerance to minor suspended solids than ordinary lift check valves, applicable for sewage.
  • Simple structure with fewer parts, low failure rate and easy maintenance.

 

Specification

 

Size DN50 ~ DN400
Nominal Pressure PN10, PN16
Temperature Range 0℃ ~ 80℃
Media Clean water, circulating water, sewage, seawater and neutral liquid
Seal Material Rubber wrapped ball (NBR / EPDM)
End Connection Flanged
Design Standard GB/T13927
Pressure Test Standard GB/T13927

 

Applications

 

Municipal water supply & drainage, sewage treatment plant, building water supply, pump station, HVAC circulating water, agricultural irrigation piping. Prevent backflow and protect water pumps.

 

Installation

 

Available for horizontal installation or vertical upward installation. Fluid direction must follow arrow mark on valve body. Not for vertical downward pipelines. Clean pipeline debris before installation to avoid scratch on rubber ball. Not suitable for high temperature or strongly corrosive media.

 

Hot Tags: cast iron ball‑type flanged check valve, China cast iron ball‑type flanged check valve manufacturers, suppliers, factory

Send Inquiry