Shijiazhuang Hanqian Technology Co., Ltd. is one of the leading manufacturers and suppliers of slow‑closure flanged check valve with slight resistance in China. With abundant experience, we are committed to providing high quality customized valves with competitive price. If you're going to wholesale durable slow‑closure flanged check valve with slight resistance made in China, welcome to get quotation from our factory.
Micro-resistance Slow-closing Flanged Check Valve (Model HH44X / HH44H) is an automatic swing check valve with flanged ends, commonly installed at pump outlets. Forward water flow pushes the disc open. Equipped with counterweight, it keeps low flow resistance. When pump stops and backflow occurs, the valve closes most of the stroke rapidly, and the remaining small stroke closes slowly via hydraulic piston assembly. The needle valve adjusts slow-closing time to absorb water hammer, avoid pump reverse rotation and protect pumps and pipeline network. Body material optional ductile iron or WCB cast steel with rubber soft seal, widely used in water supply, municipal and pump station pipelines.
Construction
Valve body, bonnet, disc, shaft, counterweight assembly, hydraulic piston cylinder, needle regulating valve, rubber seal.
Operation: Fully automatic, operated by fluid pressure difference and hydraulic buffer mechanism, no actuator required.
Features
- Flanged connection for easy disassembly and maintenance. Two-stage closing: fast partial closing followed by slow final closing to greatly reduce water hammer pressure and protect pipeline.
- Counterweight design enables light disc opening and low flow resistance for energy saving.
- Adjustable slow closing time from 0~60 seconds via needle valve for different pipeline conditions.
- Rubber soft seal achieves tight shut-off, stable operation with low vibration and noise.
- Ductile iron or WCB cast steel body options, high strength and resistant to water pressure impact.
- Mainly for horizontal installation, some sizes available for vertical upward installation, ideal for pump outlets.
Specification
| Size | DN50 ~ DN800 |
| Nominal Pressure | PN10, PN16, PN25 |
| Temperature Range | 0℃ ~ 80℃ |
| Adjustable Slow-closing Time | 0~60s |
| Media | Clean water, tap water, circulating water, sewage and other neutral liquid |
| Seat Material | NBR / EPDM rubber |
| End Connection | Flanged |
| Design Standard | GB/T13927 |
| Pressure Test Standard | GB/T13927 |
Applications
Municipal water supply pump station, building water supply & drainage, power plant circulating water, sewage treatment, agricultural irrigation pump outlet piping. Prevent backflow, reduce water hammer and protect pumps and pipelines.
Installation
Horizontal installation preferred. Flow arrow marked on valve body must match fluid flow direction. Install at pump outlet. Clean welding slag and debris before installation. Adjust needle valve on site to set slow-closing time. Not suitable for strongly corrosive media. Protect hydraulic piston chamber to avoid jamming by solid particles.
Hot Tags: slow‑closure flanged check valve with slight resistance, China slow‑closure flanged check valve with slight resistance manufacturers, suppliers, factory