Cast Iron Rising Stem Flanged Gate Valve

Send Inquiry
Cast Iron Rising Stem Flanged Gate Valve
Details
Ductile iron rising stem flanged gate valve (OS&Y), model Z41X. Body and bonnet are cast from QT450-10 ductile iron with flanged ends. It adopts outside screw & yoke (OS&Y) rising stem design, the wedge is fully vulcanized rubber coated resilient seal.
Category
Flanged Gate Valve
Share to
Description

Shijiazhuang Hanqian Technology Co., Ltd. is one of the leading manufacturers and suppliers of cast iron rising stem flanged gate valve in China. With abundant experience, we are committed to providing high quality customized valves with competitive price. If you're going to wholesale durable cast iron rising stem flanged gate valve made in China, welcome to get quotation from our factory.

 

Ductile iron rising stem flanged gate valve (OS&Y), model Z41X. Body and bonnet are cast from QT450-10 ductile iron with flanged ends. It adopts outside screw & yoke (OS&Y) rising stem design, the wedge is fully vulcanized rubber coated resilient seal. Rotate handwheel to lift or lower the stem; the wedge moves perpendicular to fluid flow to open or close the valve. Rising stem moves up/down together with gate, so valve open/closed status can be visually checked directly. Full bore passage creates minimal pressure drop. It is designed for isolation service, not recommended for throttling. Internal and external epoxy coating for anti-corrosion. Widely used in municipal water supply, fire protection, sewage, HVAC water pipeline systems.

 

  • OS&Y Rising Stem: Stem threads are outside valve body, separated from medium to avoid corrosion and jamming. Open/close position visible at sight, preferred for fire protection systems.
  • Flanged Connection: Bolted flange joint, easy disassembly & maintenance, stable pressure resistance.
  • Resilient Rubber Coated Wedge: Ductile iron core fully vulcanized with EPDM or NBR rubber, bi-directional tight shut-off, good silt resistance.
  • Full Bore: Inner bore matches pipe diameter, low pressure loss, smooth fluid passage.
  • QT450 Ductile Iron Body: High tensile strength & toughness, better impact resistance than grey cast iron; epoxy powder coating inside & outside for rust and water corrosion protection.
  • Stainless Steel Stem: Wear & corrosion resistant; packing gland prevents external leakage.

 

Item Specification

 

Nominal Size DN50~DN600
Nominal Pressure PN10, PN16, PN25 / Class150
Working Temp 0~80℃(EPDM);0~60℃(NBR)
Applicable Media water,air
Body QT450-10 Ductile Iron QT450-10
Wedge Ductile iron with full rubber coating
Stem 2Cr13 / 410 Stainless Steel
Rubber EPDM / NBR
Flange Standard GB/T9113, EN1092-2, ASME B16.5
Design & Test GB/T12232, GB/T13927, BS5163, EN12266
Operation Handwheel Manual

 

Hot Tags: cast iron rising stem flanged gate valve, China cast iron rising stem flanged gate valve manufacturers, suppliers, factory

Send Inquiry