CS Piston Steam Pressure Reducing Valve

Send Inquiry
CS Piston Steam Pressure Reducing Valve
Details
Cast steel piston steam pressure reducing valve is a pilot piston type pressure reducing valve with WCB cast steel body, assembled by main valve and pilot valve.
Category
Piston‑type Steam Pressure Reducing Valve
Share to
Description

Shijiazhuang Hanqian Technology Co., Ltd. is one of the leading manufacturers and suppliers of cs piston steam pressure reducing valve in China. With abundant experience, we are committed to providing high quality customized valves with competitive price. If you're going to wholesale durable cs piston steam pressure reducing valve made in China, welcome to get quotation from our factory.

 

Cast steel piston steam pressure reducing valve is a pilot piston type pressure reducing valve with WCB cast steel body, assembled by main valve and pilot valve. Driven by the energy of steam medium itself, the pilot valve senses pressure variation downstream and drives the piston to adjust the opening of main valve disc. It reduces high-pressure steam and stabilizes outlet pressure at preset value. It features high pressure regulation accuracy and large flow capacity, suitable for steam pipelines with fluctuating inlet pressure and load. No external power supply required.

 

Main Features

 

  • WCB cast steel body: High temperature & high pressure resistance, impact resistant, high structural strength for high-temperature steam service.
  • Pilot piston structure: Pilot valve senses pressure and drives main valve via piston, high pressure stability and reliable performance under large flow conditions.
  • Self-operated operation: Regulated by medium pressure itself, no external power such as electricity or compressed air needed.
  • Hard alloy sealing: Hard alloy overlay on main valve sealing surface, wear & erosion resistance and long service life.
  • Wide differential pressure range: Stable pressure reduction even with fluctuation of upstream pressure and downstream steam consumption.

 

Specification

 

Body Material WCB Cast Steel
Internal Parts 2Cr13 / 304 Stainless Steel
Connection Type Flange (threaded optional)
Nominal Diameter DN15~DN300
Nominal Pressure PN16, PN25, PN40, PN63; Class150~Class600
Outlet Pressure Range 0.1~4.0MPa
Applicable Medium Saturated steam, superheated steam
Working Temperature ≤425℃
Standards GB/T12246, ASME B16.5, ASME B16.34

 

Applications

 

Power plant steam systems, chemical steam pipelines, heating networks, food, printing & dyeing, rubber and other industrial steam pressure reduction & stabilization systems.

 

Notes

 

1. Install in accordance with flow marking on valve body, horizontal installation recommended. A strainer **must be installed upstream** to prevent debris from jamming piston assembly.

2. Minimum pressure differential between inlet and outlet is required. Insufficient differential pressure causes failure of pressure stabilization.

3. Adjust regulating spring slowly during initial commissioning to set target outlet pressure. Avoid large one-time adjustment.

4. Pressure gauge and safety valve are recommended on downstream side to prevent overpressure.

5. Periodic maintenance: clean internal dirt and inspect wear of piston and sealing surfaces.

 

Hot Tags: cs piston steam pressure reducing valve, China cs piston steam pressure reducing valve manufacturers, suppliers, factory

Send Inquiry