Cast Iron Threaded Check Valve

Send Inquiry
Cast Iron Threaded Check Valve
Details
Cast Iron Threaded Check Valve (Model H11T / H11X) is an automatic non-return valve, including swing type H11T metal hard seal and H11X rubber soft seal.
Category
Threaded Check Valve
Share to
Description

Shijiazhuang Hanqian Technology Co., Ltd. is one of the leading manufacturers and suppliers of cast iron threaded check valve in China. With abundant experience, we are committed to providing high quality customized valves with competitive price. If you're going to wholesale durable cast iron threaded check valve made in China, welcome to get quotation from our factory.

 

Cast Iron Threaded Check Valve (Model H11T / H11X) is an automatic non-return valve, including swing type H11T metal hard seal and H11X rubber soft seal. It adopts female threaded connection without flanges for easy installation, mainly used for small-bore pipelines. The valve body is cast iron. The disc opens and closes automatically by medium pressure to prevent backflow and protect small pumps and pipeline equipment. It features compact size and economical cost, widely used in small-size water supply, drainage, HVAC and compressed air pipelines. It consists of valve body, bonnet, swing disc and sealing seat.

 

Working Principle

 

When fluid flows forward, medium pressure pushes the swing disc open to allow flow passage. When flow stops or reverses, backpressure plus disc self-weight pushes the disc to close tightly against seat and block reverse flow.

 

Features

 

  • Female threaded connection, easy assembly without flanges, suitable for DN15~DN50 small bore pipes.
  • Cast iron body with high mechanical strength, durable, optional epoxy coating for corrosion protection.
  • Two sealing options: H11T metal hard seal for high-temperature water & steam; H11X rubber soft seal for bubble-tight zero leakage for clean water.
  • Simple structure with few components, low failure rate and easy maintenance.
  • Small size and light weight, space-saving.
  • Fluid direction must follow the arrow marked on valve body.

 

Specification

 

Model H11T (Metal Hard Seal), H11X (Rubber Soft Seal)
Size Range DN15 ~ DN50 (1/2" ~ 2")
Pressure Rating PN10 / PN16
Shell Test Pressure 1.5PN; Seat Test Pressure
Working Temperature H11X
Suitable Media Clean water, sewage, steam, compressed air, neutral oil
Material Body HT200 Grey Cast Iron / QT450 Ductile Iron; Disc
End Connection Female Thread BSP / NPT; Test Standard GB/T13927

 

Applications

 

Small pump outlet, domestic water supply, HVAC pipeline, boiler room, tap water branch, air compressor pipeline, small fire service branch.

Installation note: Swing threaded check valve for horizontal installation; vertical pipeline recommends spring lift threaded check valve H12X.

 

Hot Tags: cast iron threaded check valve, China cast iron threaded check valve manufacturers, suppliers, factory

Send Inquiry