Grooved Rubber‑flap Check Valve

Send Inquiry
Grooved Rubber‑flap Check Valve
Details
H84X Grooved Rubber Flap Check Valve is a one-way valve with grooved coupling ends. The valve body is QT450 ductile iron with internal & external epoxy powder coating.
Category
Grooved Check Valve
Share to
Description

Shijiazhuang Hanqian Technology Co., Ltd. is one of the leading manufacturers and suppliers of grooved rubber‑flap check valve in China. With abundant experience, we are committed to providing high quality customized valves with competitive price. If you're going to wholesale durable grooved rubber‑flap check valve made in China, welcome to get quotation from our factory.

 

H84X Grooved Rubber Flap Check Valve is a one-way valve with grooved coupling ends. The valve body is QT450 ductile iron with internal & external epoxy powder coating. Grooved ends connect with couplings quickly without flanges or welding. The key component is rubber flap with steel plate and reinforced nylon fabric substrate, fully vulcanized with EPDM or NBR rubber. It opens and closes automatically by medium pressure to prevent backflow, protect pumps and reduce water hammer. It consists of valve body, bonnet and rubber flap. Simple construction and easy maintenance, widely used in fire protection and water supply grooved pipeline systems.

 

Working Principle

 

When fluid flows forward, medium pressure pushes the rubber flap open for flow passage. When pump stops and reverse flow tends to occur, backpressure and flap self-weight press the rubber flap tightly against valve seat to block backflow. Short opening stroke reduces slamming and water hammer. Horizontal installation is preferred.

 

Features

 

  • Grooved coupling connection, no flanges required, fast assembly & disassembly, ideal for fire grooved piping.
  • Ductile iron body with epoxy powder coating inside and outside, anti-corrosion, compliant with fire pipeline standards.
  • Full bore streamlined passage, low head loss, less debris accumulation.
  • Resilient rubber seat achieves bubble-tight zero leakage, good sealing under low pressure.
  • Only rubber flap is moving part, low failure rate. Rubber flap can be replaced separately, low maintenance cost.
  • Short closing stroke, low slamming noise and effective water hammer reduction.

 

Specification

 

Model H84X
Size Range DN50 ~ DN600
Pressure Rating PN10 / PN16 / PN25
Shell Test Pressure 1.5PN; Seat Test Pressure
Working Temperature 0~80℃ (EPDM rubber up to 120℃)
Suitable Media Fire water, clean water, sewage, neutral liquid
Material Body QT450 Ductile Iron with epoxy powder coating; Rubber flap
End Connection

Grooved coupling; Test Standard GB/T13927, fire standard GB/T5135.2

Large size can be equipped with hydraulic buffer cylinder for two-stage closing to further mitigate water hammer.

 

Applications

 

Fire sprinkler, fire hydrant grooved piping, municipal water supply & drainage, building pump room, wastewater treatment, reservoir bypass and pump outlet pipelines.

Installation note: Horizontal installation preferred; select other check valve types for vertical installation.

 

Hot Tags: grooved rubber‑flap check valve, China grooved rubber‑flap check valve manufacturers, suppliers, factory

Send Inquiry